AlgoDelta FAQ

AlgoDelta is a browser-based trading technology platform from Rajkot, India. It copies orders from a master demat account to any number of child accounts across 30+ Indian brokers, connects TradingView, Chartink, Python, MT4/MT5 and AmiBroker signals to your broker, and runs an Order Manager for trigger entries, targets, stop-losses and group risk. It works on NSE, BSE and MCX.

About AlgoDelta

No. AlgoDelta is a pure technology platform. It is not a stockbroker, investment adviser, research analyst or portfolio manager. Your funds and securities stay with your own broker, and AlgoDelta only sends the orders you configure.

No. AlgoDelta does not provide tips, research calls, recommendations, ready-made profit systems or assured returns. You decide what to trade; the platform executes the workflows you set up.

Read the disclaimer

Create a free account, connect your demat accounts, create a group with one master and one or more child accounts, then place an order in the master. Setup takes a few minutes, and the free trial lets you test every feature first.

Start the free trial

AlgoDelta is cloud-based and runs in any browser, so it works on mobile phones, tablets, laptops and desktops without installing anything. You can also keep placing master orders from your broker's own mobile app.

Copy trading means every order placed in one master account is automatically repeated in other connected child accounts. In AlgoDelta you place the order anywhere you normally trade – your broker's website, mobile app or another algo platform – and AlgoDelta detects it on the master account and sends the configured orders to every child account in the group.

See copy trading

Child orders are sent to all brokers in parallel, at almost the same moment the master order is detected. AlgoDelta uses a distributed execution setup where each child account runs on its own IP route, so one account never waits for another. Final fill time still depends on each broker's API response, the exchange and your margin.

How copy trading speed works

Not guaranteed. Orders reach every broker at nearly the same time, but fill prices can differ because of broker response time, liquidity, margin and slippage. Limit orders keep the price under your control.

Multiplier mode scales the master quantity for each child: master buys 2 lots, a child with multiplier 3 gets 6 lots and a child with 0.5 gets 1 lot. Fixed-lot mode always sends a set quantity to that child, whatever the master trades.

Yes. Any supported broker can be the master and any supported broker can be a child, for example a Kotak Neo master with Zerodha, Dhan and Angel One children. Cross-broker copying is one of the most used AlgoDelta setups.

See all brokers

There is no fixed limit on child accounts. You pay per connected demat account, so you can grow from 2 accounts to hundreds and run several groups in parallel.

AlgoDelta copies orders on NSE, BSE and MCX, including equity, futures and options and commodity, as far as each broker's API and your account permissions allow.

Yes. If your algo places orders in one account, set that account as the master and AlgoDelta copies every order to the child accounts. You can also send your algo's signals straight to a group through the bridge.

Multiple account management lets you connect many broker accounts to one browser dashboard, group them, and place, modify, convert or square off one order across all accounts in the group, with live P&L, positions and margin for each account.

Multiple account management

When a group is selected in the JSON Bridge, Custom Bridge or Order Manager, orders are placed only in the child accounts of that group. The master account is used only for copy trading, where its own orders are the source.

Yes. With Link Sharing Demat Connection you send a link; your client registers, adds their own broker account and refreshes their own token. Their account then appears on your side as a user account you can add to groups, bridges or the Order Manager, without them sharing broker IDs, passwords or PINs.

No. AlgoDelta runs fully in the cloud and in your browser. There is no VPS to rent and no desktop software to keep running for copy trading, bridges or the Order Manager.

A bridge receives a signal from an analysis platform – TradingView, Chartink, MT4/MT5, AmiBroker, Python or any app that can send a webhook – and turns it into an order in your connected broker account or group.

See the bridge

Create a bridge in AlgoDelta and copy its webhook URL. In TradingView, create an alert on your strategy or indicator, paste the webhook URL and the alert message shown in AlgoDelta, then send a small test alert before going live.

Step-by-step guide

Webhook alerts are a TradingView feature available on its paid plans, so you need a plan that includes webhook notifications. Check TradingView's current plan page.

Both connect TradingView indicators or strategies to your broker. Custom Bridge is the simplest to set up. JSON Bridge adds script-specific orders, target, stop-loss, trailing stop-loss, rollover, option strike selection and exit on opposite, and it can be called from Python or any code.

Yes. Generate the JSON syntax in the JSON Bridge and POST it to your bridge webhook URL from Python whenever your strategy gives a buy or sell signal. The same works from Node.js, Excel macros, Telegram bots or any tool that can send an HTTP request.

Python & API bridge

Yes. The JSON Bridge selects the option contract for you: ATM-based (with an ATM gap for ITM/OTM), premium-based (closest premium to your target within a max variation) or symbol-based, with weekly or monthly expiry and exit on opposite signal.

Options automation

You build your own scanner in Chartink and point its webhook to AlgoDelta. Every stock the scan returns becomes a buy or sell order with its own target and stop-loss. AlgoDelta does not supply scans or stock picks.

Chartink connection

Yes. Add the strategy's webhook code to MetaTrader and its signals are placed as orders with your Indian broker on NSE, BSE or MCX. AlgoDelta does not give access to forex or international markets.

MetaTrader connection

Create a strategy in AlgoDelta and add its webhook code to your AFL. Buy and sell signals become orders with adaptive position sizing, and you can step in manually while the strategy runs.

AmiBroker connection

Use bar-close alerts in Pine Script, use strategy alerts with position size, and turn on exit on opposite in the JSON Bridge so a repeated signal does not stack positions. You can also pause a bridge without deleting it.

The Order Manager places and manages positions by rules: enter when price reaches a trigger, then exit at a target, stop-loss or trailing stop-loss, between a start and end time. Positions can be grouped with a combined target and combined stop-loss.

Order Manager

Four types: LTP (exit at an exact price), Points (distance from entry), Percentage (percent from entry) and Candle (exit when a 1, 3, 5, 10 or 15 minute candle closes beyond your level). Trailing stop-loss moves your stop as price moves in your favour.

Yes. Create an order group, add positions in different scripts (for example a Reliance future and an Adani Power future), then set a combined target and combined stop-loss. Each order group works independently with its own capital, timing and limits.

Yes. Add the position in the Order Manager with "already open" enabled and set the target, stop-loss or trailing stop-loss. The Order Manager then watches and exits it for you.

Yes. Set an end time on the position or order group and the Order Manager exits it at that time, which is useful for intraday and expiry-day square-off.

AlgoDelta supports 30+ Indian brokers, including Zerodha, Angel One, Groww, Upstox, Dhan, FYERS, Kotak Securities, ICICI Direct, IIFL, 5paisa, Alice Blue, Motilal Oswal, Nuvama, Flattrade, Shoonya, Jainam, Profitmart, Rupeezy, Definedge, JM Financial, PL Capital, Goodwill, Zebu and more. Any of them can be a master or a child.

All supported brokers

Many brokers now accept API orders only from a whitelisted static IP. AlgoDelta gives you a dedicated static IPv4 or IPv6 per account. Several brokers also have a no-static-IP connection in AlgoDelta, including Zerodha (without API), Angel One, Kotak Securities No IP, Alice Blue No IP and Jainam Lite.

Static IP by broker

You can use the same static IP across different brokers. For several accounts at the same broker, each account needs its own static IP – for example 10 Kotak accounts need 10 static IPs.

It depends on the broker. Angel One, Kotak Securities (static IP), Zerodha without API, Groww, IIFL, Definedge, JM Financial and several others need no daily login, and Dhan supports a one-click token refresh. Brokers such as Upstox, FYERS, Flattrade, Shoonya and Zerodha with API expire tokens daily, so you re-authorise before market open.

Login rules by broker

Some brokers give API access free, some charge, and some need it enabled first. This is between you and your broker and is separate from the AlgoDelta subscription.

Send us the broker name. New brokers are added regularly; integration depends on the broker publishing a usable trading API.

Request your broker

Yes. Algo companies, trading desks and educators can run AlgoDelta under their own brand to onboard users, let them connect their own broker accounts, and manage every account, group, bridge and strategy from one place, with extended features for scale.

White label

The white label operator is. AlgoDelta provides technology only. If you offer advice, research, strategies or account management to third parties, you must hold the SEBI registration the law requires (for example RA, IA or PMS) and follow broker and exchange rules.

AlgoDelta costs ₹400 + 18% GST (₹472) per connected demat account per month. That includes groups for copy trading and multiple account management, the Order Manager and the TradingView bridge. A static IPv4 is ₹400 + GST per month and a static IPv6 is ₹300 + GST per month, per account.

See pricing

Yes. Every new account gets a free trial to explore the platform before subscribing.

Start the free trial

Yes. Pricing is flat per connected account with no setup fee and no per-order charge, so cost grows in a straight line as you scale. ₹472 a month works out to about ₹15.73 a day per account including GST – usually less than the brokerage on one order.

Payments are non-refundable once a subscription or service is purchased, which is why the free trial exists. See the Refund Policy for details.

Refund policy

AlgoDelta stores broker credentials and tokens encrypted, uses OTP verification, real-time validation and a dedicated static IP per broker account, and never holds your money: funds and securities stay with your broker, and AlgoDelta cannot withdraw them.

How we protect your data

No. AlgoDelta connects through broker trading APIs that place and manage orders. Funds and securities never leave your broker, and AlgoDelta does not custody client assets.

Use strong unique passwords, turn on two-factor authentication at your broker, never share OTPs, passwords or API secrets, and revoke API access for tools you no longer use.

Trading involves risk of loss, and automation adds technical risks: broker API downtime, exchange or internet outages, slippage, rejected orders, low margin and wrong settings. Start small, keep margin in every account and monitor positions.

Risk disclosure

Yes, algorithmic trading is allowed in India and is regulated by SEBI, the exchanges and brokers' API rules, which change from time to time. Retail API trading now generally runs through broker-approved APIs with static IP whitelisting. Check your broker and the latest SEBI circulars.